Advent ADV10A Guide d'installation télécharger pdf (Page 12)

128-8934

Red / black - Lamp on

To 3 pin

connector

constant

+12 VDC

constant

+12 VDC

Black / red - Lamp common

Purple / brown - Lamp Auto

Factory Door ajar

switch or Body

Control computer

Troubleshooting:

SYMPTOM: REMEDY:

No power at Video Monitor

Power but no video or sound

Verify +12 VDC on the Red wire at 2 Pin Power Harness

behind the video monitor. Verify a ground connection

with a continuity test from a known good ground to the

black wire at the 2 Pin Power Harness.

Verify that the correct source is selected (i.e.: 1, 2, 3 or

4). Verify that the source is on and playing a known

good media (such as a videotape). Verify the

connections at both ends of the source component

harness.

Negative Switched Dome Lighting

Fused

1 2 ... 7 8 9 10 11 12

Pas de commentaire

Advent ADV10A Guide d'installation Page 12